eufy X10 Pro Omni Parts & Accessories

Looking for replacement dust bags, filters, brushes, mop pads, cleaning solution, or other parts for your eufy X10 Pro Omni? This guide covers the verified parts that fit, maintenance guidance, and compatible alternatives where we’ve found one worth recommending.

Covers the eufy X10 Pro Omni T2351 family, including black and white versions where shared parts apply.

Disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Need a part fast? Start with the Quick Parts Finder below.

Quick Parts Finder

Use this table to match the part you need with the verified eufy part number or buying path. For compatible replacements, confirm the listing specifically names the eufy X10 Pro Omni or T2351 family before ordering.

Part type	Part / Item	What it does	Where to Buy
Accessory kit	T29G00R1 replacement accessory kit	Replaces several common wear items in one package	eufy; Amazon compatible
Dust bags	T29F70A2 dust bags	Collects debris emptied into the Omni station	eufy; Amazon compatible
Filter	T29E80W1 washable filter	Helps maintain airflow and capture fine debris	eufy
Brush roll	T29G10J1 roller brush + guard	Provides the main floor-cleaning agitation and pickup	eufy; Amazon compatible
Side brushes	T29A1031 side brushes	Sweeps debris from edges and corners into the cleaning path	eufy
Mop cloths	T29E7031 mop cloths	Scrubs hard floors during mopping cycles	eufy; Amazon compatible
Cleaning solution	T29C3121 cleaning solution	Supports wet-floor cleaning through the Omni system	eufy; Amazon compatible
Battery	OEM replacement battery	Powers the robot vacuum	eufy support
Station filter	X10 Pro Omni station filter	Helps maintain filtration and airflow in the Omni station	eufy
Power cord	T2276111-91 power cord	Supplies power to the Omni station	eufy

Part numbers matter. eufy sells similar-looking accessories for several robot families, so confirm the part number and X10 Pro Omni fitment before ordering.

---

eufy X10 Pro Omni Replacement Accessory Kit

Recommended Replacement

• Product: eufy X10 Pro Omni Replacement Accessory Kit
• Part number: T29G00R1
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM direct option; verified compatible Amazon option

The accessory kit is the most convenient choice when several routine-wear parts need attention at the same time. Instead of buying one consumable now and another a few weeks later, the kit gives X10 Pro Omni owners a single refresh point for multiple maintenance items.

It makes the most sense for heavier-use homes, pet owners, or anyone who wants to keep spare parts on hand rather than waiting for a worn brush or dirty filter to interrupt the cleaning schedule. If only one part is worn, buying that part individually may still be the better value.

The eufy direct listing is the OEM route. The Amazon option we cleared is a compatible replacement, not genuine eufy OEM, so fitment should still be checked against the T2351 family before ordering.

eufy X10 Pro Omni Dust Bags

Recommended Replacement

• Product: eufy X10 Pro Omni Dust Bags
• Part number: T29F70A2
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM direct option; verified compatible Amazon option

The Omni station automatically empties debris from the robot into the dust bag, so the bag is one of the parts owners will replace most often. A bag that becomes overly full can restrict airflow through the station and reduce how effectively the base empties the robot.

Replacement timing depends on how often the robot runs and how much debris it collects. Homes with pets, larger floor areas, or frequent daily cleaning will usually fill bags faster than light-use homes.

OEM bags are the simplest fitment choice. Compatible bags can also work well when the collar, seal, and dimensions are specifically made for the X10 Pro Omni. The Amazon option below is a compatible replacement, not genuine eufy OEM.

eufy X10 Pro Omni Washable Filter

Recommended Replacement

• Product: eufy X10 Pro Omni Washable Filter
• Part number: T29E80W1
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM route

The washable filter helps maintain airflow through the robot while trapping fine dust before it reaches the motor and exhaust path. Because airflow affects pickup performance, a neglected filter can make an otherwise healthy vacuum feel weaker.

Inspect the filter regularly and clean it as needed. Replacement becomes appropriate when the material is damaged, permanently discolored or clogged, or when cleaning no longer restores normal airflow.

We are keeping this part on the OEM route for now because we do not currently have a verified Amazon replacement we are comfortable recommending for exact T2351 fitment. Use part number T29E80W1 when checking eufy parts or contacting support.

eufy X10 Pro Omni Roller Brush + Guard

Recommended Replacement

• Product: eufy X10 Pro Omni Roller Brush + Guard
• Part number: T29G10J1
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM direct option; verified compatible Amazon option

The main roller brush handles most of the robot’s direct floor pickup. Hair, string, and debris can wrap around the roller and its ends, while normal use gradually wears the brush surfaces that contact carpet and hard flooring.

Clean wrapped hair before assuming the roller needs replacement. Replace the roller when the brush surface is worn, damaged, or no longer making effective contact with the floor. The guard should also be replaced if it becomes cracked, warped, or damaged enough to interfere with the roller.

Replacing the roller and guard together can make sense when both have seen heavy use. The Amazon option below is a compatible replacement, not genuine eufy OEM.

eufy X10 Pro Omni Side Brushes

Recommended Replacement

• Product: eufy X10 Pro Omni Side Brushes
• Part number: T29A1031
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM direct option

The side brushes pull debris away from walls, baseboards, corners, and other edges so the main cleaning path can pick it up. Because the bristles extend beyond the robot body, they take more direct contact with furniture and room edges than many other parts.

Remove wrapped hair and inspect the bristles regularly. Brushes that stay sharply bent, lose bristles, or no longer touch the floor correctly can leave more debris behind along edges.

We currently recommend the direct eufy route for T29A1031 rather than an unverified Amazon substitute.

eufy X10 Pro Omni Mop Cloths

Recommended Replacement

• Product: eufy X10 Pro Omni Mop Cloths
• Part number: T29E7031
• Fitment: eufy X10 Pro Omni T2351 family
• Type: Genuine eufy OEM direct option; verified compatible Amazon option

Mop cloth condition directly affects how evenly the robot scrubs hard floors. Pads that are loaded with residue, flattened from repeated use, or worn at the edges may still attach correctly but clean less effectively.

Wash the pads regularly and keep an extra clean set available if the robot mops often. Rotating sets lets one pair dry fully while another is in use and reduces the temptation to keep running heavily soiled pads.

Replace pads when the fibers become noticeably worn, frayed, flattened, or no longer clean well after washing. The Amazon option below is a compatible replacement, not genuine eufy OEM.

eufy X10 Pro Omni Cleaning Solution

Recommended Replacement

• Product: eufy Cleaning Solution
• Part number: T29C3121
• Fitment: eufy X10 Pro Omni mopping system
• Type: Genuine eufy OEM direct option; verified compatible Amazon option

The cleaning solution is part of the X10 Pro Omni’s wet-floor cleaning system, so this is one area where using a suitable formula matters. The wrong cleaner can leave excess residue, create unwanted foaming, or introduce ingredients the system was not designed around.

How quickly a bottle is used depends on how often the robot mops and the size of the hard-floor area. Owners who run frequent mopping cycles may find it more convenient to keep a spare bottle on hand rather than waiting until the current supply is empty.

For the least guesswork, use the eufy direct option. The Amazon option below is a compatible replacement, not genuine eufy OEM.

eufy X10 Pro Omni Replacement Battery

OEM / Support Route

Battery wear usually shows up as shorter cleaning runs, more frequent returns to the dock, or a battery that no longer holds the same charge it did when new. Before replacing the battery, rule out normal causes such as unusually demanding cleaning modes or charging-contact issues.

Battery fitment and electrical specifications matter more than they do with routine consumables. For that reason, we are not recommending a random third-party Amazon battery for the X10 Pro Omni.

Use eufy support to confirm the correct replacement battery for your exact T2351 unit before ordering or installing a replacement.

eufy X10 Pro Omni Station Filter

Genuine eufy Replacement

The station filter supports airflow and filtration inside the Omni base. Because the dock handles debris collection and maintenance functions for the robot, keeping the station itself clean is just as important as maintaining the vacuum.

Inspect the filter periodically and clean it as directed. Replace it when the material is damaged, heavily clogged, or cleaning no longer restores normal condition or airflow.

We currently recommend the genuine eufy station-filter route rather than an unverified Amazon substitute.

eufy X10 Pro Omni Power Cord

Genuine eufy Replacement

• Part number: T2276111-91
• Fitment: eufy X10 Pro Omni station
• Type: Genuine eufy OEM direct option

The power cord should be replaced if the insulation, plug, or cord body is damaged. Do not continue using a cord with exposed wiring, severe cuts, or other visible electrical damage.

This is another part where exact specifications matter. Rather than substituting a generic cord based only on appearance, use the eufy part number so the station receives the correct connection and power specification.

What Should You Replace and When?

Item	Check	Clean	Replace
Dust bag	Check bag level and station performance regularly	—	When full or when station airflow drops
Filter	Inspect regularly	Clean as needed according to eufy guidance	If damaged, worn, or airflow does not recover after cleaning
Roller brush	Check monthly for hair and wear	Remove wrapped hair and debris	When brush surfaces are worn or damaged
Side brushes	Inspect regularly	Remove hair and debris	When bristles stay bent, worn, or no longer contact the floor correctly
Mop cloths	Inspect after regular use	Wash regularly and rotate clean sets	When worn, frayed, flattened, or no longer cleaning effectively
Station filter	Inspect periodically	Clean as needed	When damaged, clogged, or cleaning no longer restores airflow
Battery	Watch runtime and charging behavior	—	When runtime declines substantially or charging becomes unreliable
Power cord	Inspect for visible damage	—	Immediately if damaged

---

Will These Parts Fit My eufy X10 Pro Omni?

This guide is built around the eufy X10 Pro Omni T2351 family, including black and white versions where the same replacement parts apply. The safest way to avoid a mismatch is to compare the part number on the listing with the part number in this guide before ordering.

Do not assume that a brush, filter, mop pad, or dock accessory fits simply because it looks similar to a part used on another eufy robot. eufy sells multiple robot families with accessories that can look nearly identical while using different dimensions, attachment points, or station designs.

When we list an Amazon option as compatible, that means it is a third-party replacement rather than genuine eufy OEM. Exact X10 Pro Omni fitment should still be stated on the product listing.

Genuine eufy OEM vs Compatible Replacement Parts

Not every replacement part needs the same buying strategy. Routine consumables such as bags, mop pads, and some brush components can be reasonable places to consider a verified compatible replacement when the fitment is clear and the product meets our standard.

For batteries, power components, and any part where electrical specifications or exact mechanical fit matter, we take a more conservative approach and favor the OEM or manufacturer-support route.

Whenever a recommendation on this page is not genuine eufy OEM, it is labeled as a compatible replacement. We do not treat a generic part as interchangeable simply because the listing claims broad compatibility.

The Bottom Line

The eufy X10 Pro Omni has a useful replacement-parts ecosystem, and the routine items owners are most likely to need — bags, brushes, mop cloths, filters, and cleaning solution — can be handled without replacing the vacuum itself.

For everyday consumables, start with the exact eufy part number and then compare the OEM and verified compatible options shown here. For battery, power, and station components, staying with eufy or confirming the part through eufy support is the safer path.

The biggest mistake to avoid is ordering by appearance alone. Confirm the X10 Pro Omni T2351 fitment and part number first, especially when shopping outside eufy’s own parts pages.

Frequently Asked Questions

Which models does this page cover?

This page covers the eufy X10 Pro Omni T2351 family, including black and white versions where the same replacement parts apply.

Where can I buy genuine eufy X10 Pro Omni parts?

Use eufy’s official parts listings and the OEM part numbers shown in this guide. Where we have a verified direct eufy product page, the direct button is included in the relevant section above.

Are compatible replacement parts safe to use?

Compatible consumables can be reasonable when the listing specifically confirms eufy X10 Pro Omni fitment and the part is clearly identified as third-party. We are more conservative with batteries, power components, and parts where exact specifications matter.

How often should dust bags be replaced?

Replace the dust bag when it is full or if the station begins struggling to move debris from the robot into the bag. Homes with pets, more floor area, or frequent cleaning runs will usually fill bags faster.

How often should filters be cleaned or replaced?

Inspect the filter regularly and clean it as needed. Replace it when the filter is damaged, permanently clogged, or cleaning no longer restores normal airflow.

Can I use third-party mop pads?

Yes, when the pads are specifically made for the eufy X10 Pro Omni and fit securely. Compatible pads should be treated as third-party replacements, not genuine eufy OEM.

Can I buy one kit instead of individual parts?

Yes. The T29G00R1 replacement accessory kit is useful when several routine-wear items are due at the same time or when you want to keep common spares on hand. If only one component is worn, buying that part individually can be more economical.

How do I know a replacement really fits the T2351 family?

Match the product listing to the exact part number in this guide and confirm that the listing specifically names the eufy X10 Pro Omni or T2351 family. Similar appearance alone is not enough to confirm fitment.

Which parts wear out fastest?

Dust bags, mop pads, side brushes, filters, and the main roller are the most routine wear items. Actual life varies with cleaning frequency, pet hair, floor type, and how well the parts are maintained.

Is it worth keeping spare parts on hand?

Keeping spare dust bags, filters, mop pads, and brushes can be useful if the X10 Pro Omni cleans frequently. Those items are more likely to need routine replacement than the battery, station filter, or power cord.

What should I avoid buying generically?

Avoid guessing on batteries, power cords, and other electrical or fitment-sensitive components. For those parts, use the exact OEM part or confirm the replacement through eufy support.

Which parts should stay OEM?

Battery and power components are the strongest candidates for staying OEM because correct fitment and electrical specifications matter. OEM is also the simplest choice whenever a compatible listing cannot be verified confidently.

Where can I find replacement battery or power parts?

Use eufy’s support or official parts channels for the battery. The power cord is identified as part T2276111-91 and has a direct eufy buying path above.

---

More Robot Vacuum Guides

For more buying guidance and comparisons, these VCG guides cover closely related vacuum types and use cases.

• 6 Best Robot Vacuum and Mop Combos in 2026
• 6 Best Self-Emptying Robot Vacuums in 2026
• 6 Best Robot Vacuums With Obstacle Avoidance in 2026

Keep Your eufy X10 Pro Omni Maintained

The right bags, filters, brushes, mop pads, and wear parts can help keep the eufy X10 Pro Omni performing properly and prevent avoidable loss of airflow, pickup, or mopping performance. Always confirm the exact model and part number before ordering.

eufy X10 Pro Omni T2351 English Manual

eufy X10 Pro Omni Support